Make your home as unique as you are with this steampunk-style quadruple light switch cover. The two gears/levers in the center operate toggle switches (the kind you flick on and off with your finger), while the two valves on either end operate dimmer switches. Just turn to the left to dim lights and turn to the right to brighten them. Because the switch cover is made from 1/4 inch raw steel, it has an authentic Industrial look.
My design fits any standard size quadruple-gang light switch box in the USA.
This light switch comes fully assembled with the electrical dimmer component already attached. PLEASE NOTE, UNLIKE MY OTHER LIGHT SWITCH COVERS, THESE DIMMERS REQUIRE SOME ADDITIONAL WIRING. Your order includes all necessary hardware, as well as instructions for installation, although I recommend that installations be completed by a qualified electrician.
The dimmer switches are rated for 150W LED, 150 CFL, 600W Incandescent and 120 AC, 60Hz. They are single pole Rotary Dimmers.
If you also require a toggle switch, please let me know when you place your order, and I can include them free of charge.
My lever system has a bolt and nut design that allows you to adjust the amount of torque needed to flip the lights on and off. Your purchase comes with a small, matching wrench to help you adjust the bolts to the desired tension. It also comes with a steel spacer plate that ensures a tight seal against the wall and also prevents wobbling and unsightly gaps.
The base plate measures 4.75 inches tall by 8 inches long. Levers extend 4 ¾ inches from the wall.
When installing, a good option is to turn your existing toggle switches upside down so that the up/down, on/off action of the levers is not reversed.Please allow 3-5 business days before items ship. Custom orders or very large orders may take longer.
5-7 business days
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.
Just contact me within: 14 days of delivery
Ship items back to me within: 30 days of delivery
Please contact me if you have any problems with your order.
I do not use or share your information, except in the following instances:
* as needed to provide my services, such as when I use your information to fulfill your order, to settle disputes, or to provide customer support;
* if necessary to comply with a legal obligation or court order or in connection with a legal claim, such as retaining information about your purchases if required by tax law; and
Light switches should be oiled (I prefer to use WD40) at least once a year in order to prevent rusting.
My light switches with levers ONLY work with toggle switches (the kind you flick up and down with your finger). It's easy to change from a dimmer or other type of light switch to a toggle switch.
Any properly installed and functioning light switch has a safety ground. There should be no dangerous voltages anywhere near a properly functioning switch. The toggle switch itself is plastic, which is also an insulator. Whenever you are working with electricity, however, it’s always a good idea to turn off the breaker and double check your wires to make sure the insulation on your wiring is intact, and that the ground is connected to the switch. If the copper wire is exposed, or if the insulation is cut, you could get a shock due to faulty wiring.
Before installing, please ensure that your current light switches are functioning properly, that your switch is grounded, and that there are no loose wire connections.